*WIFI/GSM//GPRS alarm system,support different alarm channels.like APP push/SMS/Call/Voice monitoring etc. to ensure the alarm performance stable and reliable.
*2.4 inch TFT display screen,concise user interface and menu hint design.
*Main interface status bar,date/clock indication,fairly obvious alarm host status.
*Support up to 100 learning /storage location for remote control,RFID cards and wireless detectors.
*Support many defense zones ,such as gate, SOS,bedroom,window,balcony,perimeter,water leaking.etc.
*Support the main power malfunciton ,backup power shortage,tamper alarm and other extended alarm.
*Support entry/exit zone,indoor zone,perimeter zone,24-hour zone, Doorbell Zone etc.
*Up to 5 groups preset alarm phone numbers ,SMS on/off and dial on/off can be set respectively.
*Support timing arm and disarm.
*Can store and inquire daily operation records and alarm records.
*GSM Network clock synchronization,to ensure accurate clock ,and support country time zone setting.
*Support multi-language menu display,voice prompts and alarm SMS setting.
*Can record 20 seconds voice message
*Telephone function,support 5 groups re-dial number.
*Support APP remote arm/diarm,parameter setting and accessory management.
1 WIFI GSM alarm panel
4 Mini wireless PIR detectors
5 Mini wireless door/window magnetic sensors
2 RFID key fobs
1 Power Adapter (with 1M USB cable)
1 Wired siren
1 Manual instruction
Note: 1. The WIFI connection is 802.11b/g/n 2.4G, don't support 5G. If your WIFI router includes dual frequency 2.4G + 5G, please switch 5G to be 2.4G before start device WIFI configuration.
2. GSM frequency: 850/900/1800/1900, SIM Card not included. 3. Support only 2G GSM SIM card, or 3G/4G SIM card including 2G transmission service. Please use T-mobile SIM Card in USA. Before buy, please make sure T-mobile has service in your local place.
Wifi and GSM dual network protect your home, safer and more stable.
Connect WIFI 802.11b/g/n 2.4G (not 5G), no need wired RJ45 cable, easier installation. App remote control, Wifi free push messages, more simple, more economical. a. H36 panel will push alarm notification to your android or ios phone via WIFI when someone break in your house. b. You can also remote control H36 ARM/DISARM by using APP.
If your home no wifi or wifi signal unstable or wifi router power off, you can use gsm SIM Card network. a. Insert GSM SIM Card to H36 and save your phone number to panel. When alarm system be triggered, KONLEN H36 will atuo call and send SMS to the preset phone numbers. b. You can also remote control the alarm system by using App.
Support Multi alarm zone name setting: Including the door alarm, Living Room Alarm, Panic Alarm, Bedroom Alarm, Window Alarm, Balcony Alarm, Perimeter Alarm, Leakage Alarm etc. Users will be very easily know which sensor where trigger the alarming.
Before buy, you can check the operation video in youtube https://www.youtube.com/playlist?list=PLdfQsLEGIo4tQDLmwmJINqmr4MelmnI-t