Search "(2016 New App) NuCam 720p" in Youtube for our installation video released in Nov. 2016. With the updated app "NuCam", you can set it up easily
1. Before you screw in the Nucam to the socket, go to the NuCam app and type in the Cam ID with password as shown on the sticker on the NuCam.
2. If the camera shows offline, click the question mark and screw the NuCam into socket with power turned on.
3. The camera wifi "NUxxxx"will show up on your wifi setting of your phone. Connect to it. If not shown up in 2 mins, use a pin to push the reset button through the pinhole.
4. Once it is paired and camera wifi turns recognizable on the left top corner of your phone in 1 min, camera will show online and now you can do advanced setting.
5. Go to wireless setting to find your home/office router SSID and type in password to connect to the internet. After rebooting, now you can watch live video anywhere.
Camera Pixels: 1.0M HD, 720p resolution
Microphone and infrared LED: Built-in
Speaker: N/A, under development.
Night Vision Range: 1-15m
Input Voltage:AC 110V~250V
Motion detection and infrared LED night vision: Yes
5" long 360 degree flexible base extender and 32gb mircoSD card included. Or you can buy B074N9LGQF.
1. Use Wifi Security type WPA or other type instead of low security type WEP to do connection. The camera does NOT work under 5G WiFi.
2. You may need to go to the same local network with the camera (LAN) to play back the recorded videos in the microSD card.
3. Make sure the installation spot has reliable 2.4G WiFi signal. Otherwise try to use more powerful router or move the router closer to the camera.
4. Make sure your installation location has good wifi signal.
5: This camera is intended for indoor use or outdoor use with shroud protected or under eave. For outdoor, we recommend our NuCam WR model.
INSTALL easily, with no special wiring, drilling, expertise or tools, by screwing bulb into a standard E26/E27 light fixture
MOTION DETECTION with alarm option (push notice to your cellphone or email) available and begins recording immediately, microSD(goes up to 32gb)/smartphone/PC memory recording
WIFI connectivity transmits to your 3G/4G smartphone, including Android, iPhone, iPad or PC
NIGHT VISION with 3rd generation IR array let you view/record the activities at night up to 15m, Turning on/off the LED light from the app on your phone remotely.
NO monthly fee to save video-recording surveillance footage in the icloud. HD live video with recording option saves to smartphone memory or to microSD card (to 32gb)